Equipos Nuevos y Usados para la Venta

Todos los Equipos: CNC - Centros de Maquinado - 219 Listados

Abajo reafine su busqueda segunmanufacturer, condicion y region

Gerentes de Ventas
Gordon Waite
Ext. 315

	1994 WEEKE "BP- 12 "	1996 WEEKE "BP- 12 "	2004 BIESSE "SKIPPER 100 "	2001 MORBIDELLI "AUTHOR 427 S "
Ver Maquinaria Recomendada Seleccionada de la Semana Pasada

Pagina 1 de 8

Ver Todo el Listado

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

EX-FACTORY#

Marca/Modelo/Tipo de máquina

Fotos/Literatura

BP-011418	ACCU-SYSTEMS "VX-SERIES " ...CNC HYBRID MACHINING CENTER
$ 34,750	MACHINE CONFIGURATION: Fixed Bridge Type, dual-shuttle table (front to back). The front-side of the bridge has a router spindle, the back-side has a l... Haga clic para ver más .
	Buena Condición	Year: 2004
Midwest	"HIGH PRODUCTION CAPACITY" drills (92) holes in 3 seconds - Ideal for Closet or Garage Organizer Operation!	Fotos / Literatura

BP-011472	ALBERTI "B- 8/CN " ...CNC POINT-TO-POINT DRILL
$ 7,500	Equipped with: (7) independently selectable spindles on 64 mm centers plus (1) 5 HP HF router (14,000 RPM) with (3) stop depth controls, 1/4", 3/8" an... Haga clic para ver más .
		Year: 1986
Midwest	Older machine, if you have one or more already this could be a good addition to the group at a low cost.	Fotos / Literatura

BP-011421	ALBERTI "BASIC CN " ...POINT-TO-POINT BORING MACHINE
$ 18,500	Capacity: X-Axis is 118", Y-axis is 39.4"; machine operates as a feed through with the panels being moved in the X-axis while the working head moves i... Haga clic para ver más .
	Muy Buena Condición	Year: 1997
Southeast	A rather "basic", but very userfriendly entry machine into P.to.P. boring!	Fotos / Literatura

BP-011497	ALBERTI "MONOLIT C-N " ...POINT-TO-POINT BORING MACHINE
$ 27,500	Boring unit with (15) independent spindles, capacity: X-axis = 118", Y-axis = 39", work area divided into (2) independent work stations allowing to wo... Haga clic para ver más .
	Buena Condición	Year: 1989
Midwest	A lot of machine & equipment value for the money!	Fotos / Literatura

BP-010683	BIESSE "ROVER 13 " ...CNC POINT-TO-POINT BORING MACHINE
$ 11,030	(12) Spindles driven by 1.8 HP - 4,000 RPM motor; (8) spindles are vertical and independently operated with (4) along the X-axis and (4) along the Y-a... Haga clic para ver más .
	Muy Buena Condición	Year: 1996
Midwest	An ideal starter machine & at an attractive price!	Fotos / Literatura

BP-011302	BIESSE "ROVER 13 S " ...CNC POINT-TO-POINT BORING MACHINE
$ 16,200	(16) Spindles driven by 2.3 HP - 4,000 RPM motor; (10) spindles are vertical and independently operated with (6) along the X-axis and (4) along the Y-... Haga clic para ver más .
	Excelente Condición	Year: 1998
Northeast	Machine is/was in a "small 1-man shop" & has never been run hard!	Fotos / Literatura

BP-011477	BIESSE "ROVER 15 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 11,500	Working cap. for boring & routing: X-Axis 86-1/2" (2,200 mm), Y-axis 35.4" (898 mm) when boring and 37.4" (950 mm) when routing, cantilevered style he... Haga clic para ver más .
	Muy Buena Condición	Year: 1999
West Coast	JUST REDUCED! Computer up-dated to X-NC 1000 in 2009! An exceptionally well-maintained machine!	Fotos / Literatura

BP-010647	BIESSE "ROVER 15 " ...CNC P.T.P. BORING MACHINE
$ 12,560	(16) Spindles driven by 2.3 HP - 4,000 RPM motor; (10) spindles are vertical and independently operated with (6) along the X-axis and (4) along the Y-... Haga clic para ver más .
	Buena Condición	Year: 2000
Northwest	An ideal starter machine & at an attractive price!	Fotos / Literatura

BP-011641	BIESSE "ROVER 16 " ...CNC POINT-TO-POINT DRILL
€ 10,800	(10) Vertical spindles on 32 mm centers individually controlled of which (6) are along X- & (4) along Y-axis; (4) horizontal spindles with (2) in ea. ... Haga clic para ver más .
	Buena Condición	Year: 1988
Belgium	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-011655	BIESSE "ROVER 20 " ...CNC MACHINING CENTER W/ATC
$ 24,900	Working span for boring & routing: X- Axis is 113.5" (2,885 mm), Y-axis is 35.4" (898 mm) for boring and 37.4" (950 mm) for routing, max. panel thickn... Haga clic para ver más .
	Buena Condición	Year: 2001
Southwest	A Great Value for the money!	Fotos / Literatura

BP-011399	BIESSE "ROVER 20 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 25,000	(16) Spindles driven by 2.3 HP - 4,000 RPM motor; (10) spindles are vertical and independently operated with (6) along the X-axis and (4) along the Y-... Haga clic para ver más .
	Buena Condición	Year: 1999
Eastern Cdn	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-280422	BIESSE "ROVER 20 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 35,000	Working span for boring & routing: X- Axis is 113-1/2" (2,885 mm), Y-axis is 35.4" (898 mm) for boring and 37.4" (950 mm) for routing, max. panel thic... Haga clic para ver más .
	Excelente Condición	Year: 2002
Northeast	A LOADED "Rover 20" with lots of whistles & bells!	Fotos / Literatura

BP-011585	BIESSE "ROVER 20 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 47,250	Working span for boring & routing: X- Axis is 113-1/2" (2,885 mm), Y-axis is 35.4" (898 mm) for boring and 37.4" (950 mm) for routing, max. panel thic... Haga clic para ver más .
	Muy Buena Condición	Year: 2007
Eastern Cdn	Year 2007 model ready to shine at new location; ...customer is selling to buy different equipment!	Fotos / Literatura

BP-011643	BIESSE "ROVER 23 " ...CNC MACHINING CENTER WITH ATC
€ 23,100	Working cap.: "X" Axis is 114.2" (2,900 mm), "Y" axis is 47.6" (1,208 mm) for boring & 51.2" (1,300 mm) for routing, "Z" stroke axis is 6.1" (155 mm).... Haga clic para ver más .
	Muy Buena Condición	Year: 1999
Italy	An exceptionally well-maintained machine!	Fotos / Literatura

BP-011575	BIESSE "ROVER 23 " ...CNC MACHININING CENTER WITH ATC & "C" AXIS
$ 25,300	Working cap.: X-Axis is 114.2" (2,900 mm), Y-axis is 47.6" (1,208 mm) for boring & 51.2" (1,300 mm) for routing, Z-axis is 6.1" (155 mm). ; Max. prog... Haga clic para ver más .
	Buena Condición	Year: 1999
Eastern Cdn	Machine is under power and may be viewed.	Fotos / Literatura

BP-011578	BIESSE "ROVER 27 " ...CNC MACHINING CENTER W/ATC
$ 34,900	Working cap.: X-Axis is 135" (3,432 mm), Y-axis is 39" (989.5 mm) for boring and 51" (1,300 mm) for routing, Z-axis is 6" (155 mm); max. programmable ... Haga clic para ver más .
	Muy Buena Condición	Year: 2000
West Coast	A lot of machine & equipment value for the money!	Fotos / Literatura

BP-011652	BIESSE "ROVER 27 " ...CNC MACHINING CENTER W/ATC
$ 35,000	Working cap.: X-Axis is 135" (3,432 mm), Y-axis is 39" (989.5 mm) for boring and 51" (1,300 mm) for routing, Z-axis is 6" (155 mm); max. programmable ... Haga clic para ver más .
	Muy Buena Condición	Year: 2001
West Coast	A true workhorse!	Fotos / Literatura

BP-011274	BIESSE "ROVER 30 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 18,000	Working cap.: X-Axis = 174-3/4" (4,438 mm), Y-axis = 49-3/16" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65-3/8" (1,600 mm) for ... Haga clic para ver más .
		Year:
West Coast	Seller states "EXCELLENT parts machine or possible fixer upper project!	Fotos / Literatura

BP-011478	BIESSE "ROVER 30 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 29,700	Working cap.: X-Axis = 174-3/4" (4,438 mm), Y-axis = 49-3/16" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65-3/8" (1,600 mm) for ... Haga clic para ver más .
	Muy Buena Condición	Year: 1999
West Coast	JUST REDUCED!...NEW NC 1000 controller installed in 2009...an exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-011541	BIESSE "ROVER 30 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 29,800	Working cap.: X-Axis = 174.75" (4,438 mm), Y-axis = 49.2" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65.4" (1,600 mm) for boring... Haga clic para ver más .
	Muy Buena Condición	Year: 2001
Northeast	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-011645	BIESSE "ROVER 30 " ...CNC MACHINING CENTER WITH ATC
$ 45,900	Working cap.: X-Axis = 174.75" (4,438 mm), Y-axis = 49.2" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65.4" (1,600 mm) for boring... Haga clic para ver más .
	Muy Buena Condición	Year: 2001
Northeast	A true workhorse!	Fotos / Literatura

BP-011541	BIESSE "ROVER 30 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 49,500	Working cap.: X-Axis = 174.75" (4,438 mm), Y-axis = 49.2" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65.4" (1,600 mm) for boring... Haga clic para ver más .
	Muy Buena Condición	Year: 2001
Northeast	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-280381	BIESSE "ROVER 30 S2 " ...CNC P.T.P. MACHINING CENTER W/ATC
$ 38,500	Working cap.: X-Axis = 135" (3,210 mm), Y-axis = 56" (1,425 mm) for boring and 64-1/2" (1,641 mm) for routing, Z-axis = 7-1/4" (185 mm); max. programm... Haga clic para ver más .
	Buena Condición	Year: 1999
Mtn/central Cdn	A Great Value for the money!	Fotos / Literatura

BP-011483	BIESSE "ROVER 36 " ...POINT-TO-POINT BORING MACHINE
€ 15,000	Work area cap.: 3,200 mm (126") Length, 1,020 mm (40") width. Boring unit with (23) independent vertical spindles for face boring, (2 + 2) x 2 horizon... Haga clic para ver más .
	Buena Condición	Year:
Sweden	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-011492	BIESSE "ROVER 321 R " ...CNC P.T.P. BORING MACHINE
$ 14,900	(19) Spindles driven by 2.3 HP - 4,000 RPM motor; (13) are vertical & independently operated in T-formation with (8) along the X-axis & (5) along the ... Haga clic para ver más .
	Buena Condición	Year: 1995
Mid-atlantic	Seller states "machine is in good running condition and ready to go"!	Fotos / Literatura

BP-011390	BIESSE "ROVER 321 R " ...CNC P.T.P. MACHINING CENTER
$ 28,000	(19) Spindles driven by 2.3 HP - 4,000 RPM motor; (13) are vertical & independently operated in T-formation with (8) along the X-axis & (5) along the ... Haga clic para ver más .
	Buena Condición	Year: 1997
Mtn/central Cdn	An exceptionally well-maintained machine - something you rarely see!	Fotos / Literatura

BP-011415	BIESSE "ROVER 322 " ...CNC MACHINING CENTER WITH ATC & "C" AXIS
$ 14,500	Working cap.: X-Axis is 106.2" (2,700 mm), Y-axis is 49" (1,245 mm) for routing; X-axis is 106.2" (2,700 mm), Y-axis is 51.15" (1,300 mm) for boring; ... Haga clic para ver más .
	Buena Condición	Year: 1998
Northwest	Motivated seller says "Make me a reasonable offer!"	Fotos / Literatura

BP-280418	BIESSE "ROVER 322 " ...CNC POINT-TO-POINT MACHINING CENTER
$ 19,999	Working cap.: X-Axis= 106.2" (2,700mm), Y-Axis= 48.8" (1,239mm) for routing; X-Axis= 106.2" (2,700mm), Y-Axis= 51.15" (1,300mm) for boring; travel spe... Haga clic para ver más .
	Buena Condición	Year: 1997
West Coast	Rover 322 CNC router in good working condition. It is being replaced by a new machine and we need to sell it to make room. The machine is up and running in our production line!	Fotos / Literatura

BP-011368	BIESSE "ROVER 325 " ...CNC P.T.P. MACHINING CENTER
€ 13,500	Working cap.: X-Axis = 126" (3,200 mm), Y-axis = 37" (944 mm) for routing; X-axis = 126.2" (3,200 mm), Y-axis = 37" (944 mm) for boring; travel speed ... Haga clic para ver más .
	Buena Condición	Year: 1991
Denmark	Still in "pretty good" condition at a FRACTION of a new machine price!	Fotos / Literatura

BP-280383	BIESSE "ROVER 325 " ...MACHINING CENTER
$ 15,000	Working cap.: X-Axis = 126" (3,200 mm), Y-axis = 37" (940 mm) for routing; X-axis = 126.2" (3,200 mm), Y-axis = 37" (940 mm) for boring; travel speed ... Haga clic para ver más .
	Buena Condición	Year: 1991
Mtn/central Cdn	A true workhorse!	Fotos / Literatura

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

Pagina 1 Of 8 Total Regresar arriba

Imprimir esta Pagina

1805 Sardis Road North - Charlotte, North Carolina 28270 EE.UU
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Servicio al Consumidor: Silvia Falconi

Almacén / Centro de Reacondicionamiento de Maquinaria CNC
8191 Logistic Drive - Zeeland, Michigan 49464 EE.UU
Phone:+ 1 616-772-1520 Fax:+1 616-772-1690
Servicio al Consumidor: Silvia Falconi

Derechos de autor © 2010 EX-FACTORY INC. Todos los derechos reservados
----- Politica de Privacidad -----