(16) Spindles driven by 2.3 HP - 4,000 RPM motor; (10) spindles are vertical and independently operated with (6) along the X-axis and (4) along the Y-...

An ideal starter machine & at an attractive price!

Working cap.: X-Axis is 122" (3,100 mm), Y-axis is 49" (1,250 mm) & Z-axis is 6.1" (155 mm); max. programmable speed: X- & Y-Axis is 3,937 IPM and Z-a...

JUST REDUCED 15k! Seller states it is a 2003 SHOWROOM DEMONSTRATER! ... Installed in 2005 with approx (800) total hours of operating time!

Working cap.: X-Axis is 145" (3,685 mm), Y-axis is 61" (1,550 mm), X-asis working field with all the tools is 145" (3,685 mm), X-axis working field wi...

Biesse line of 37 FTS is the Superduty flat table machine

Nested Base Manufacturing Cell consisting of BIESSE "Rover-A" Machining Center. ; Working cap.: X-Axis is 145" (3,685 mm), Y-axis is 50.8" (1,290 mm)...

Late "top-of-the-line" model and ready for immediate delivery with only 2,000 hours!

Nested Base Manufacturing Cell consisting of BIESSE "Rover" Machining Center. ; Working cap.: X-Axis is 145" (3,685 mm), Y-axis is 54" (1,380 mm) & Z...

Seller States "ITS LIKE NEW...Less than 30 total documented hours of operation"!

Nested Base Manufacturing Flat Table machine Working cap.: X-Axis is 145" (3,685 mm), Y-axis is 53-1/2" (1,360 mm) & Z-axis is 6.3" (160 mm); max. pro...

2004 Flat Table, nested base with low hours; 10-Position ATC; everything but the pump!

Nested Base Manufacturing Cell with BIESSE "Rover" Machining Center. ; Working cap.: X-Axis is 252" (3,685 mm), Y-axis is 54" (1,380 mm) & Z-axis is ...

Large, long table Router with 20' plus X-Axis; ...10-Tool ATC!

Working cap.: X-Axis is 144" (3,683 mm), Y-axis is 60" (1,525 mm), Z-axis clearance is 7" (180 mm ), working field: for routing 145" X 65.3" for dilli...

JUST REDUCED!...A lot of machine & equipment value for the money!

Flat Table design for "Nested Base" manufacturing. ; Working field: "X" axis 120" (3,050 mm), "Y" axis 49.2" (1,250 mm), "Z" axis 4.7" (120 mm), 6.7"...

JUST REDUCED!...A Condition like this!... and at a VERY GOOD PRICE!

Flat Table design for "Nested Base" manufacturing. The "Jet 200 RT" features a sweeping system with an automatic loading/unloading device, staging tab...

Price has been reduced! - Take it before somebody else snatches it away!

Flat Table design for "Nested Base" manufacturing; system with an automatic loading/unloading device, staging table & dust extraction system that give...

This is the perfect Raised Panel Door machine with large work area!

This flat table machining Center built by MASTERWOOD has a full working area of 110" x 48" x 4" and offers a quick and easy solution to boring and rou...

A really "best buy" for 4' x 9' Flat Table CNC with ATC and in such super condition!

Material processing dimensions of 49" x 98.4" x 8". ; Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Moving ga...

The "WR 408" is ideal for nested based cabinets, producing (1) box every (9) minutes. - The machiines runs unattended, freeing the operator to assemble boxes.

This 4' x 8' cap. router can replace your Panel Saw and Drill using less floor space, and it uses Single-Phase power!

1-Man, 1-machine, (50) cabinets per day assembled!

Material processing dimensions of 49" x 98.4" x 8". ; Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Moving ga...

Brand new with a short learning curve...great machine for nesting cabinets with a push buttom, "quick change" tool feature.

Material processing dimensions of 49" x 98.4" x 8". ; Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Moving ga...

Great machine for nesting cabinets with a push button, "quick change" tool feature.

Material processing dimensions of 49" x 98.4" x 8". ; Fixed 6 zone vacuum table, with vacuum pressure guage. The factory installed vacuum table is de...

The "WR 408" is ideal for nested based cabinets, producing (1) box every (9) minutes. - The machiines runs unattended, freeing the operator to assemble boxes.

This 4' x 8' cap. router can replace your Panel Saw and Drill using less floor space, and it uses Single-Phase power!

1-Man, 1-machine, (50) cabinets per day assembled!

Material processing dimensions of 62" x 122" x 8". ; Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Moving gan...

The "WR 510" is ideal for nested based cabinets, producing (1) box every (9) minutes. - The machiines runs unattended, freeing the operator to assemble boxes.

This 4' x 8' cap. router can replace your Panel Saw and Drill using less floor space, and it uses Single-Phase power!

1-Man, 1-machine, (50) cabinets per day assembled!

Fixed universal aluminum T-slot table for simple clamping of workpiece to machine. ; Moving gantry bridge rides on high precision HIWIN linear rails ...

Large work area with the convenience of a "Quick Change" spindle and an affordable price! lot of machine & equipment value for the money!

Flat table "Nested Base Manufactoring" vacuum table size 61"(1550 mm) x 120" (3050 mm) with a 8" (200 mm) vertical highth machining capacity. ; Mo...

A lot of machine & equipment value for the money!

Working cap.: X-Axis: 152"(3868 mm), Y-axis: 68.7" (1746 mm), Z-axis: 12.6" (320 mm); max. programmable speed: X- & Y-Axis are 3,937 IPM (100 MPM) and...

A Machine like this doesn't come on the market often!

Routing, Edgebanding & Boring Center with a 220" (5,600 mm) x 55.1" (1,400 mm) working field; closed phenolic flat table and vacuum supply system that...

An exceptionally well-maintained machine - Cleaned & Checked!

Routing, Edgebanding & Boring Center with a 228" (5,800 mm) x 63" (1,600 mm) working field with (9) adjustable material support arms and vacuum supply...

A true workhorse!

CNC Numerically controlled Machining Center & automatic Edgebanding Machine; Working size: X-Axis is 5,000 mm (196.8"), Y-axis is 1,600 mm (62.9"); pr...

A Great Value for the money!

CNC Numerically controlled Machining Center & automatic Edgebanding Machine; Working size: X-Axis is 5,600 mm (220.4"), Y-axis is 1,200 mm (47.2"); pr...

A true workhorse!

Routing, Edgebanding & Boring Center with a 220.48" (5600mm) x 47.25" (1200mm) working field. ; Includes: HOMATIC PLC controller system with Windows/...

High production at a fraction of new

CNC router with; working table of "X" axis 181" (4,600 mm), "Y" axis 63" (1,600 mm), "Z" axis 10" (250 mm), position speed of "X" & "Y" axis (80 M/MIN...

A true workhorse!

HOMAG Processing Center with trimming, profiling, shaping, & boring of solid wood, man-made sheet stock, or composite material. ; Equipped as follows...

JUST REDUCED!... "HOMAG BOF" with 26' x 5' worktable. A True Workhorse for sure!

CNC router with; working table of "X" axis 165" (4,200 mm), "Y" axis 63" (1,600 mm), "Z" axis 10" (250 mm), position speed of "X" & "Y" axis (80 M/MIN...

A lot of machine & equipment value for the money with only 2,900 hours!

5 - Axis measuring CNC with a "RENISHAW" touch probe model "PH10M". ; Granite measuring table of 55.43" X 156.69" fixed table, moving gantry machine ...

Really hot item! - I wish we could offer more than only ONE.

Working cap.: X-Axis is 118" (3,000 mm), Y-axis 50" (1,270 mm) when routing, Z-axis 4.7" (120 mm); positioning speed on X- & Y-axis is 262 FPM. - YASK...

Late "top of the line" model and ready for immediate delivery.